Here is a guide on how to best apply your new vinyl decal.

Step 1

Clean the area thoroughly soap and water. Do not use a glass cleaner because it will leave a residue behind that will prevent the sticker from adhering well.

Step 2
Rub a credit card firmly across the sticker on top of the clear transfer tape to prepare it for application. This ensures the sticker will cling to the transfer tape and removes any air bubbles that may have formed.

Step 3
Peel the bottom paper backing off the sticker. If the sticker clings to the backing, slowly replace the paper backing and repeat Step 2.

Step 4
Carefully lower the sticker onto the surface and rub it in place firmly with a  credit card. For best results, wait 24 hours before moving to the next step, at a minimum wait 5 minutes.

Step 5
Slowly peel the clear transfer tape off at an angle. Be careful not to pull the decal off the surface. If sticker pulls away from the surface repeat Step 4.